Chelsey Little, plant supervisor at Montague Clean Water Facility in Massachusetts, takes challenges head-on. Read TPO’s October 2023 issue to learn how the facility installed the ES-302 two-channel Volute™ dewatering press to address one of their most ambitious undertakings.
For more on this, CLICK HERE
The Tellico Area Services System in Maryville, Tennessee, built the Niles Ferry Wastewater Treatment Plant to treat 2 mgd. Read the August 2023 issue of TPO to learn how this new facility used the Volute™ Dewatering Press to yield drier biosolids.
For more on this, CLICK HERE
At the Fair Oaks Ranch Wastewater Treatment Plant in San Antonio, TX biosolids management was a top concern. To address this issue, the plant turned to wet hauling. PWTech offers a dewatering press that uses Volute™ technology to handle projects — saving handline costs. Learn more about the pilot in the June 2023 TPO issue.
For more on this, CLICK HERE
Another successful installation and start-up for the PW Tech Volute Press — this time in Santa Paula, CA. With its simplicity, compact size, and light weight, this installation is as simple as it gets — set it down and turn it on.
This customer went from hauling liquid WAS to producing 22% cake within minutes of start-up. Dewatering made easy #screwpress2.0
And — if you are paying attention, you will notice that this is an expandable system. Simply drop in another rotating assembly and double the capacity when you need it.
Are you ready to try the Volute press yet? Let us pilot at your plant. We’ll bring the proof to you.
Thanks to our California representative JBI Water & Wastewater for this one!
Another successful Volute Dewatering Press start-up by PW Tech, this time in Harris County Texas. This plant previously used drying beds to dewater sludge to ~7-8%TS, now dewatering using their PW Tech Volute Press to ~18% solids within an hour of starting up for the first time!
The result? Happy Operators and another successful dewatering installation. Dewatering made easy. #screwpress 2.0
A great project. Thanks to Wharton Smith Contractors and LJA Engineering!
Three days of a booth packed with customers and future customers — watching the success of the Volute Dewatering technology #screwpress 2.0 take the industry by storm is humbling. Thank you, everyone!
